Follow Us on Socials

FLOOR SCREEDS & TOPPINGS

Triple Action Coatings

heatreflective coatings

waterproofing coatings summer cool roof paint The continuous production & process plants represents a huge investment. They are designed for a floor service life time in excess of 30 years, so the durability of the protection for these assets is a very important requirement. Every nonscheduled down time for essential repairs or maintenance means a serious financial loss to the plant. It is always essential to ensure that the strength of the flooring system is able to accommodate the stresses generated over floor. This includes the mechanicalandchemical resistance, plus ease of cleaning,and dust prevention etc.,

summer cool paint terrace The flooring is most operational part of any Industrial, Commercial, Residential or Institutional buildings. The floor is heavily exposed to physical and chemical abuses, load due to traffic of forklift & trollies, abrasion due to mechanical wear, stress, chemical resistance to spillages from occasional to continuous immersion, temperature, snow, ice melting chemicals such as rock salt, slip resistance, impact resistance, fire resistance, conductivity, aesthetics, rapid curing, anti-bacterial and permeability to liquids. In addition, the problems of poor design, poor construction, low standards of maintenance and repair, or a combination of all three reduces the floor design life. In this high demanding industrial environment, concrete surface fails. Also concrete substrate is porous in nature thus when water, oil and other fluids enter into concrete, the reinforcing steel corrodes.Tosustain and maintain the industrial floor a protection is must. floor screeds and toppings

Monarch's FloorClad Screeds & Toppings offers highly chemically and mechanically resistant, seamless high performance flooring systems to enhance floor design life and for the ultimate convenience of easy to clean surface with increased resistance to liquid penetration. These refurbishments & protective lining systems are predominantly based on Cement, Acrylic, Epoxy, Polyurethane resins and hybrid technologies. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere resulting in productivity improvement.

Salient Features

  • Pre-measured ratio for ease of on-site mixing and use
  • Excellent adhesion to substrate
  • Good chemical and mechanical resistance
  • Easy application
  • Better Pot life
  • Economical
  • Impervious
  • High Glossy aesthetic finish- brightens up dull factories and warehouses
  • Slip resistant surface possible (broadcast & textured)
  • Water Breathable coatings
  • Seamless / Joint free application possible
  • Easily cleaned and maintained
  • Hygienic and does not support growth of bacteria and fungus
  • Available in a wide range of colors, to any standard RAL card, to improve the working environment
  • Hard Wearing-durable with low maintenance costs
  • Resistance to wide range of chemicals and liquids
  • Excellent mold resistance
  • De-contaminable - Bacteria able to be removed
  • MonoBond FP

    Fast curing solvent free epoxy primer

    View Show Details
  • MonoBond SFP

    Solvent Free Epoxy Primer

    View Show Details
  • MonoBond EP

    Solventless Epoxy Primer

    View Show Details
  • MonoBond SEP

    Solvented Epoxy Primer


    View Show Details
  • MonoBond PP

    Poly urethane modified primer for FloorClad EPU /PFC/SL 2000PU

    View Show Details
  • MonoBond MICP

    Moisture Insensitive Epoxy Primer for Damp Concrete Surfaces for WEC 3000/SL 5000WB

    View Show Details
  • MonoBond MIP

    Moisture Insensitive Epoxy Primer for Metal Surfaces



    View Show Details
  • MonoBond EC

    Epoxy resin based moisture insensitive concrete bonding agent for horizontal and vertical surfaces where mortar or concrete can be supported by formwork./ FloorClad SCS 50

    View Show Details
  • MonoBond OIP

    Oil Resistant primer




    View Show Details
  • MonoBond AR

    Acrylic Primer for Concrete Surfaces for FloorClad FPC/SP

    View Show Details
  • MonoBond SAP

    Styrene Acrylate sealing primer for cementitious flooring materials for FloorClad SCS6/SCS12

    View Show Details
  • FloorClad EPC

    Epoxy Patch Compound for Permanent Concrete Repairs

    View Show Details
  • FloorClad SEMS

    Self Levelling Epoxy based Mortar/Colour Screed @ 1.5mm-3mm

    View Show Details
  • FloorClad NSC

    Heavy duty, flow applied, lightweight anti-skid floor Toppings

    View Show Details
  • FloorClad EMS 3000

    Epoxy based Mortar/Colour Screed @ 3mm -4mm

    View Show Details
  • FloorClad EMS 5000

    Epoxy based Mortar/Colour Screed @ 4mm -6mm



    View Show Details
  • FloorClad IRS 5000

    Impact/Load resistant Epoxy Mortar Screed @ 3mm -6mm



    View Show Details
  • FloorClad SC

    Epoxy based Seal Coat to level the porous / imperfection / depressions / irregularities in epoxy mortar screed surface like FloorClad EMS 5000 / FloorClad IRS5000

    View Show Details
  • FloorClad FPC

    Fast Setting concrete Patching Compound

    View Show Details
  • FloorClad SP

    Cementitious Patching system for filling of wornout areas/holes or depressions in Concrete floors

    View Show Details
  • FloorClad SCS6

    Self Levelling Cementitious Screed @ 2mm-6mm

    View Show Details
  • FloorClad SCS12

    Self Levelling Cementitious Screed @ 6mm - 12mm

    View Show Details
  • FloorClad SCS50

    Self Leveling Cementitious Screed @ 10mm - 80mm

    View Show Details
  • FloorClad WEC3000

    Epoxy modified cementitious floor screed for Light & medium duty abrasion resistant @ 3mm - 5mm

    View Show Details
  • FloorClad PC3000

    Polyurethane modified cementitious floor screed for Light & medium duty abrasion resistant @ 3mm - 5mm

    View Show Details
  • FloorClad DC

    Epoxy Solvent Base Pigmented Floor Toppings Roller Coatings

    View Show Details
  • FloorClad EFC

    Epoxy based Glossy Pigmented Floor Topping, Roller Coating

    View Show Details
  • FloorClad CC

    Epoxy based Clear / Transparent Glossy Floor Topping, Roller Coating

    View Show Details
  • FloorClad FEC

    Food Grade & solvent free, epoxy Lining compound for food stuffs.

    View Show Details
  • FloorClad MEC

    Moisture Compatible/tolerant Epoxy Coating

    View Show Details
  • FloorClad PFC

    Polyurethane Glossy Floor Topping, Roller Coating

    View Show Details
  • FloorClad EPU

    Epoxy Polyurethane based Floor Toppings, Roller Coatings

    View Show Details
  • FloorClad FS

    Acrylic floor sealer and pigmented concrete protective coating

    View Show Details
  • FloorClad ANS

    Anti Slip Grains for non Skid Flooring System for Roll on coatings

    View Show Details
  • FloorClad SL 500

    Self Levelling Epoxy Floor Topping @ 0.5mm thickness

    View Show Details
  • FloorClad SL 1000

    Self Levelling Epoxy Floor Topping @ 1mm thickness

    View Show Details
  • FloorClad SL 2000

    Self Levelling Epoxy Floor Topping @ 2mm thickness

    View Show Details
  • FloorClad SL 3000

    Self Levelling Epoxy Floor Topping @ 2mm thickness

    View Show Details
  • FloorClad SL 4000

    Self Levelling Epoxy Floor Topping @ 4mm thickness

    View Show Details
  • FloorClad SL 5000

    Self Levelling Epoxy Floor Topping @ 5mm thickness

    View Show Details
  • FloorClad SL5000WB

    Self Leveling, damp-tolerant, water miscible,Epoxy toppings @2mm-5mm

    View Show Details
  • Floor Clad SL 2000PU

    Self Levlling Poly Urethane Floor Toppings @ 1.5 -2mm

    View Show Details
  • FloorClad CR 500

    Chemical Resistance Self Levelling Epoxy Floor Topping @ 0.5mm thickness

    View Show Details
  • FloorClad CR 1000

    Chemical Resistance Self Levelling Epoxy Floor Topping @ 1mm thickness

    View Show Details
  • FloorClad EC

    Epoxy Coving compounds to prevent dust settlement

    View Show Details
  • MonoMark DC

    Epoxy Solvent Base Pigmented Floor Toppings Roller Coatings

    View Show Details
  • MonoMark PU2K

    Two Component PU based Cold Applied durable Marking paint

    View Show Details