Reclaim worn-out equipments : Multi-purpose, specially formulated titanium filled putty having outstanding compressive strength and chemical resistance,recommended for most critical repair and reclamation work.
|
Cost saving repairs : Economical,non-shrinking steel filled putty for repair and reclamation of jobs where longer working time is required.
|
Repair bronze parts and equipments : Bronze filled putty for repairing and rebuilding worn-out bronze,brass & gun metal parts and equipments.
|
Repair aluminium parts and equipments : Aluminium filled putty for repairing and rebuilding worn-out aluminium parts and equipments.
|
Repair copper parts and equipments : Copper filled putty for repairing and rebuilding worn-out copper parts and equipments.
|
Stop live leakage without shutdown : Express curing titanium putty for quick, on-line leak arrest repair of oil, gas, etc., without taking shutdown or draining.
|
High temperature protective coating : Available in 3 ranges for service conditions till 2100C, 4100C & 6100C. Single component heat resistant coating that does not crack or peel off and having good resistance to saline environment.
|
thermal barrier insulation coating : Single component coating that blocks the heat are cold transfer through the coated surface to achieve remarkable energy efficiency by saving electricity and energy consumption. Temperature range -35°C to 650°C. The coating is compatiable with all types of paints and can be top coated if required.
|
fire retardant coating against fire hazards : Single component coating that prevents spreading of fire through puffing. The coating upon exposure to flame forms a thick insulating spongy layer and prevent penetration of heat to the surface underneath and seals out oxygen which fire requires to burn. Besides wood it can be coated over metals which buckless and bends in high temperatures. It can be top coated with decorative paints if required.
|
Reclaim worn-out equipments : Multi-purpose, specially formulated titanium filled putty having outstanding compressive strength and chemical resistance,recommended for most critical repair and reclamation work.
|
Under water repair work : Makes effective repair in chronically wet surfaces, even under water.
|
Ceramic in paste form for wear resistance : Diamond hard, ceramic filled putty for repair and reclamation of components subjected to wear caused due to erosion, cavitation and abrasion .
|
Ceramic in brushable form for protective coating : Ceramic in brushable grade for protection of process equipments against bimetallic corrosion, cavitation and pitting.
|
Ceramic in bead form for abrasion resistance : Non sagging tough ceramic system containing ceramic beads and silcone carbide for protecting process equipment against high abrasion.
|
Repair rubber parts & equipments : Polyurethane based product that cures to resilient, rubber like putty for repair of damaged rubber parts and equipment. The putty has outstanding resistance against wear caused due to impact and coarse particle abrasion.
|
Polyurethane protective coating : Polyurethane based brushable product for protection of process equipments against fine particle abrasion and impact under most aggressive conditions.
|
Backing of crusher wear plates & for epoxy grouting : 100% solids epoxy compound having high compressive strength and impact resistance for backing wear plates in primary crushers, large gyratory crushers and cone crushers for extreme heavy duty crushing. It is safer and more economical than conventional zinc backing. Also used for grouting of new machinery or replacing old grouts for making solid and perfect foundations, which resist high loads and vibration.
|
High temperature repair work till 800°C : Single component putty that seals and repairs damaged metal in operating environments up to 800°C. Non toxic and solvent free.
|
Room temperature vulcanlzing silicone sealant : Single component room temperature vulcanizing silicone sealant that cures to rubber like material in the presence of atmospheric moisture. The product has excellent resistance to vibration, moisture and atmospheric conditions.
|
Increase bond strength of epoxies : EPI Sealer is a 100% solids impermeable epoxy system designed as primer coat prior to application of epoxies on smooth surface to increase bonding strength and for protection of sand blasted surface from rusting. Recommended for durable water proofing and sealing applications to totally prevent penetration of water.
|
conditioning of surface for epoxy application : A special highly effective cleaner cum conditioner, to be used to clean and condition the surface prior to the use of Monarch epoxies.
|
for high pressure leakage applications : To be used where high bonding strength is required.
|
prevents bonding of epoxies over the substrate : To be used where bonding of Monarch epoxies has to be prevented. The negligible thickness does not alter dimension preparation in patterns and mould
|
Application kit : For easy and efficient application, use this convenient tool kit, consisting of mixing board, spatula and applicator.
|
corrosion resistant epoxy coating : 100% solids, solvent free anti-corrosion epoxy coating for protecting steel structural subject to severe corrosive environment. The coating provides a durable smooth finish having excellent weather proof resistance and also resistant to saline, moisture, water, acids & alkails.
|
high build film corrosion resistant and permanent insulation epoxy coating : Heavy duty corrosion resistant epoxy coating that achieves high build film thickness till 1 mm in single application. Widely used in electrical maintenance as a insulation coating over electrical parts and conductors to prevent failures in electrical supply caused due to flashover, short circuit etc.,
|
polyurethane coating for corrosion resistance : Polyurethane based corrosion resistant coating having good resistance to saline environment. The cured product is very elastic and withstands expansion / contraction of the substrate without cracking. Excellent bonding to steel, aluminium, copper, brass, concrete, FRP and wood and easily withstands ultravoilet rays when exposed to sunlight.
|
chemical resistance epoxy coating : Epoxy based coating system having highest chemical resistance for protecting the surfaces under severe acidic and alkaline conditions for both interior and exterior applications.
|
Protective coating for immersion applications : Epoxy tar based coating in combination with mineral fillers for protection of concrete and metal surfaces under totally submerged conditions and for above ground structurals.
|
Cold galvanising coating : 95% pure zinc composition for protection of all ferrous surfaces from rust and corrosion. The coating provides both physical barrier as well as cathodic protection to the substrate. It forms impervious metallic barrier that does not allow moisture to contact base metal and protects steel through galvanic action even if coating film get damaged or scratched.
|
Non stick maintenance coating : Silicone based coating having low surface energy that reduces adhesion ability over the coated surface and conducive for repeated cleanings by water jet. Improves efficiency of new pumps upto 5% and 28% for those already in service as the coating facilitates streamlined, frictionless flow.
|
Impregnable glass flake barrier coating : Based on isophthalic polyster system, the coating provides long term protection against dilute acids, dilute alkalis, petroleum products & aggressive atmospheric environments. Low permeation rate and excellent under cutting resistance.
|
Adhesive maintenance coating : Epoxy based adhesive for bonding or sealing of two or more separate parts.
|
Heat transfer coating : Single component heat resistant till 400°C, specially formulated for applications where maximum heat transfer is required. The ingredients of compound decipate heat at faster rate reducing the internal temperature of components. Saves tremendous amount of energy and cost that required for cooling and increase plant effciency.
|
Environment friendly cleaner and degreaser : Fast evaporating, environment friendly and bio-degradable cleaner. It is free from chloro fluro carbons and ozone depleting substances. Non-toxic does not contain phosphate,butyl, caustic, etc., Ideal alternative to CTC, TCE etc., for surface cleaning.
|
Rust coversion coating : Air drying, rust conversion coating that re-converts rust into metal. Ideal alternative to conventional abrasive blasting as it reacts with the rust in all ferrous metals and make it a part of metal substrate.
|
Easy removal of rust : Instantly removes rust on the metal substrate. Wash with clean water and dry the surface immediately after use. Multipurpose rust cleaner on the metal substrate. It cleans tarnish, oxidation, stains, finger prints and scale from iron, steel, copper , brass, and aluminium.
|
Easy removal of paints : Removes paint and coatings from the surface. Ultra strong cleaner for rapid penetration and loosening of all kind of bonded coatings like paint, carbon, dirt, varnish etc.,
|
Bio degradable hand cleaner : Hand Cleaner based on bio degradable surfacants and mild abrasives to meet the tough needs of industrial professionals. Effectively cleans most stubborn dirt like oil, grease, paint, stain, bitumen, carbon and many other chemical compounds.
|
Cleaner cum barrier for hand protection : A unique 2 in 1 concept that works as Hand Cleaner and barrier coating. Cleans the hand quickly from grease, oil, lubricants, heavy carbon contamination, resin etc., As a barrier system protect hands against penetration of diesel, petrol, kerosene, industrial solvents, paint, varnishes, lubricants, oils etc., Non-toxic and user friendly. On application cures to invisible barrier and eliminate allergic problems.
|
Meets emergency mechanical maintenance situations :
|
General purpose mechanical spray for corrosion protection : General purpose mechanical spray for moisture displacement and protection of metal against rust and corrosion. Overhaul and lubricates assembled parts.
|
Protection of ferrous metals against rust : Long term outdoor and indoor corrosion inhibiting compound to metal parts during storage, shipment and in process. The product is free from nitrites, chromates or other heavy metals and easily removable by alkaline cleaners or degreasing solvents.
|
Cold galvanizing coating : High purity zinc enriched coating to protect all ferrous surface from rust and corrosion. The coating provides physical barrier as well as cathodic protection to the steel. It forms continuous impervious metallic barrier that does not allow moisture to contact base metal and even if the coating film get damage or scratch, the sacrificial action of zinc coating through cathodic protection protects the surface, when zinc becomes anode and the base metal the cathode.
|
High temperature aluminium coating : High purity aluminium enriched coating, fast drying to provide hard lasting protection that will not burn off, chip or peel at high temperatures. Resist heat till 600°C and coated surface can be top coated if required.
|
Spray for easy penetration : Spray with low surface tension and excellent penetration properties to loosen the rust for releasing jammed nuts, bolts, studs and linkages.
|
Peelable protective coating : Easy to remove, waxy coat to protect components during shipment and storage. Does not require any solvent for cleaning or removal, just can be easily peeled off from any of the edges. Protects against scratches, stains and contamination due to paint spray, dirt and dust.
|
Enhance belt efficiency transmission : Easy to remove, waxy coat to protect components during shipment and storage. Does not require any solvent for cleaning or removal, just can be easily peeled off from any of the edges. Protects against scratches, stains and contamination due to paint spray, dirt and dust.
|
Non-silicone based release and seperating mould release spray : Non-Silicone formulation with non-staining and non-corrosive properties for parts which are required to be painted. Excellent penetration in hard to reach areas and eliminates squeaking, binding and sticking of metals, plastics, rubber and other surfaces. Convenient for easy application and removal.
|
Prevents adhesion of welding spatters : It prevents adhesion of welding spatters during welding operation eliminating the need of chiseling, wire brushing or grinding after welding. Suitable for all types welding and more effective on MIG and TIG welding.
|
Easy removal of gasket, paint and carbon deposit : The product with high penetrating power, designed for easy removal of paints, carbon deposits, gaskets, adhesives, sealants etc., eliminating damage caused by excessive scrapping.
|
Cleaner cum degreaser for in-situ applications : Multipurpose heavy duty cleaner cum degreaser for in-situ removal of grease, oil, lubricant, adhesive and contamination from machinery, equipment, motors and metal parts. It is safe on all metals and most plastics, leavies no reidue.
|
Splicer & knotter cleaner cum lubricant : Fast drying and non-toxic dry film coating for cleaning of fluff dust in autoconer machine and gives effective corrosion protection. Excellent penetrating properties and does not attract fluff dust as it is non-staining and non-sticky.
|
Easy Removal of rust : Multipurpose rust cleaner on the metal substrate. Instantly removes rust on the metal substrate.Wash with clean water and dry the surface immediately after use. It cleans tarnish, oxidation , stains ,finger prints and scale from iron, steel , copper , brass , and aluminium.
|
High temperature anti-seize lubricant : Copper based anti-seize lubricant for high pressure and high temperature applications.Resists temperature till 1100° C and prevents galling, metal to metal contact and seizing of threaded components. Easy assembly and disassembly even under corrosive atmosphere and long operational period.
|
Low friction anti-seize lubricant : The ultimate low friction dry lubricant that provides maximum lubrication in high pressure sliding surfaces. Recommended for equipments operating in dusty and moist atmosphere till 450° C. Spray to fine and uniform dispersion to withstand high load carrying capacity.
|
Lubrication and protection of chains : High performance chain and conveyor lubricant specifically designed to provide convienient, effective lubrication and protection. Good resistance to hot, cold water and steam.
|
PTFE dry surface lubricant : Fast drying and non-oily polytetra fluoro ethylene(PTFE) based anti-seize lubricant with outstanding lubricity and release properties. Most effective where low speeds and light loads are involved. The non-staining micro thin film prevents sticking, reduces friction and wear. Good thermal and chemical stability.
|
Cost saving repairs : Economical,non-shrinking steel filled putty for repair and reclamation of jobs where longer working time is required.
|
Repair bronze parts and equipments : Bronze filled putty for repairing and rebuilding worn-out bronze,brass & gun metal parts and equipments.
|
Repair aluminium parts and equipments : Aluminium filled putty for repairing and rebuilding worn-out aluminium parts and equipments.
|
Repair copper parts and equipments : Copper filled putty for repairing and rebuilding worn-out copper parts and equipments.
|
Stop live leakage without shutdown : Express curing titanium putty for quick, on-line leak arrest repair of oil, gas, etc., without taking shutdown or draining.
|
Under water repair work : Makes effective repair in chronically wet surfaces, even under water.
|
Ceramic in paste form for wear resistance : Diamond hard, ceramic filled putty for repair and reclamation of components subjected to wear caused due to erosion, cavitation and abrasion .
|
Ceramic in brushable form for protective coating : Ceramic in brushable grade for protection of process equipments against bimetallic corrosion, cavitation and pitting.
|
Ceramic in bead form for abrasion resistance : Non sagging tough ceramic system containing ceramic beads and silcone carbide for protecting process equipment against high abrasion.
|
Repair rubber parts & equipments : Polyurethane based product that cures to resilient, rubber like putty for repair of damaged rubber parts and equipment. The putty has outstanding resistance against wear caused due to impact and coarse particle abrasion.
|
Polyurethane protective coating : Polyurethane based brushable product for protection of process equipments against fine particle abrasion and impact under most aggressive conditions.
|
Increase bond strength of epoxies : EPI Sealer is a 100% solids impermeable epoxy system designed as primer coat prior to application of epoxies on smooth surface to increase bonding strength and for protection of sand blasted surface from rusting. Recommended for durable water proofing and sealing applications to totally prevent penetration of water.
|
conditioning of surface for epoxy application : A special highly effective cleaner cum conditioner, to be used to clean and condition the surface prior to the use of Monarch epoxies.
|
for high pressure leakage applications : To be used where high bonding strength is required.
|
prevents bonding of epoxies over the substrate : To be used where bonding of Monarch epoxies has to be prevented. The negligible thickness does not alter dimension preparation in patterns and mould
|
Application kit : For easy and efficient application, use this convenient tool kit, consisting of mixing board, spatula and applicator.
|
corrosion resistant epoxy coating : 100% solids, solvent free anti-corrosion epoxy coating for protecting steel structural subject to severe corrosive environment. The coating provides a durable smooth finish having excellent weather proof resistance and also resistant to saline, moisture, water, acids & alkails.
|
high build film corrosion resistant and permanent insulation epoxy coating : Heavy duty corrosion resistant epoxy coating that achieves high build film thickness till 1 mm in single application. Widely used in electrical maintenance as a insulation coating over electrical parts and conductors to prevent failures in electrical supply caused due to flashover, short circuit etc.,
|
polyurethane coating for corrosion resistance : Polyurethane based corrosion resistant coating having good resistance to saline environment. The cured product is very elastic and withstands expansion / contraction of the substrate without cracking. Excellent bonding to steel, aluminium, copper, brass, concrete, FRP and wood and easily withstands ultravoilet rays when exposed to sunlight.
|
chemical resistance epoxy coating : Epoxy based coating system having highest chemical resistance for protecting the surfaces under severe acidic and alkaline conditions for both interior and exterior applications.
|
Protective coating for immersion applications : Epoxy tar based coating in combination with mineral fillers for protection of concrete and metal surfaces under totally submerged conditions and for above ground structurals.
|
Cold galvanising coating : 95% pure zinc composition for protection of all ferrous surfaces from rust and corrosion. The coating provides both physical barrier as well as cathodic protection to the substrate. It forms impervious metallic barrier that does not allow moisture to contact base metal and protects steel through galvanic action even if coating film get damaged or scratched.
|
High temperature protective coating : Available in 3 ranges for service conditions till 2100C, 4100C & 6100C. Single component heat resistant coating that does not crack or peel off and having good resistance to saline environment.
|
thermal barrier insulation coating : Single component coating that blocks the heat are cold transfer through the coated surface to achieve remarkable energy efficiency by saving electricity and energy consumption. Temperature range -35°C to 650°C. The coating is compatiable with all types of paints and can be top coated if required.
|
fire retardant coating against fire hazards : Single component coating that prevents spreading of fire through puffing. The coating upon exposure to flame forms a thick insulating spongy layer and prevent penetration of heat to the surface underneath and seals out oxygen which fire requires to burn. Besides wood it can be coated over metals which buckless and bends in high temperatures. It can be top coated with decorative paints if required.
|
Heat transfer coating : Single component heat resistant till 400°C, specially formulated for applications where maximum heat transfer is required. The ingredients of compound decipate heat at faster rate reducing the internal temperature of components. Saves tremendous amount of energy and cost that required for cooling and increase plant effciency.
|
weather proofing compound for electrical installations : Single component, permanently elastic self adhesive sealing compound with high insulating and weather proofing properties. Non corrosive and does not solidify or softens. Easily removable and reusable. Applicable for indoor electrical insulations to insulate intricate shapes and joints. Where tapping or shrounding is difficult.
|
Durable protective coating against static charges : The coating with excellent anti static and conductive properties formulated to reduce build up of electrostatic charge on its surface. All electrostatic charges are harmlessly conducted away though the coating thus protecting the devices. Excellent resistance to abrasion and good aesthetic appearane. It can be very easily cleaned and maintained as it does not attract dust.
|
Environment friendly cleaner and degreaser : Fast evaporating, environment friendly and bio-degradable cleaner. It is free from chloro fluro carbons and ozone depleting substances. Non-toxic does not contain phosphate,butyl, caustic, etc., Ideal alternative to CTC, TCE etc., for surface cleaning.
|
Rust coversion coating : Air drying, rust conversion coating that re-converts rust into metal. Ideal alternative to conventional abrasive blasting as it reacts with the rust in all ferrous metals and make it a part of metal substrate.
|
Easy removal of rust : Instantly removes rust on the metal substrate. Wash with clean water and dry the surface immediately after use. Multipurpose rust cleaner on the metal substrate. It cleans tarnish, oxidation, stains, finger prints and scale from iron, steel, copper , brass, and aluminium.
|
Easy removal of paints : Removes paint and coatings from the surface. Ultra strong cleaner for rapid penetration and loosening of all kind of bonded coatings like paint, carbon, dirt, varnish etc.,
|
Bio degradable hand cleaner : Hand Cleaner based on bio degradable surfacants and mild abrasives to meet the tough needs of industrial professionals. Effectively cleans most stubborn dirt like oil, grease, paint, stain, bitumen, carbon and many other chemical compounds.
|
Cleaner cum barrier for hand protection : A unique 2 in 1 concept that works as Hand Cleaner and barrier coating. Cleans the hand quickly from grease, oil, lubricants, heavy carbon contamination, resin etc., As a barrier system protect hands against penetration of diesel, petrol, kerosene, industrial solvents, paint, varnishes, lubricants, oils etc., Non-toxic and user friendly. On application cures to invisible barrier and eliminate allergic problems.
|
Meets emergency electrical maintenance situations :
|
Meets emergency transformer maintenance situations :
|
PTFE dry surface lubricant : Fast drying and non-oily polytetra fluoro ethylene(PTFE) based anti-seize lubricant with outstanding lubricity and release properties. Most effective where low speeds and light loads are involved. The non-staining micro thin film prevents sticking, reduces friction and wear. Good thermal and chemical stability.
|
PTFE dry surface lubricant : Fast drying and non-oily polytetra fluoro ethylene(PTFE) based anti-seize lubricant with outstanding lubricity and release properties. Most effective where low speeds and light loads are involved. The non-staining micro thin film prevents sticking, reduces friction and wear. Good thermal and chemical stability.
|
PTFE dry surface lubricant : Fast drying and non-oily polytetra fluoro ethylene(PTFE) based anti-seize lubricant with outstanding lubricity and release properties. Most effective where low speeds and light loads are involved. The non-staining micro thin film prevents sticking, reduces friction and wear. Good thermal and chemical stability.
|
PTFE dry surface lubricant : Fast drying and non-oily polytetra fluoro ethylene(PTFE) based anti-seize lubricant with outstanding lubricity and release properties. Most effective where low speeds and light loads are involved. The non-staining micro thin film prevents sticking, reduces friction and wear. Good thermal and chemical stability.
|
PTFE dry surface lubricant : Fast drying and non-oily polytetra fluoro ethylene(PTFE) based anti-seize lubricant with outstanding lubricity and release properties. Most effective where low speeds and light loads are involved. The non-staining micro thin film prevents sticking, reduces friction and wear. Good thermal and chemical stability.
|
General purpose maintenance for electrical equipment : General purpose electrical spray that cleans, lubricates, protects, penetrates and loosens corrosion with excellent di-electric strength. It prevents electrical and electronic malfunction caused by water penetration, humiditity, condensation, corrosion, electrical leakage and short circuit.
|
Precision contact cleaner : High purity, effective precision cleaning of electrical and electronic contacts to improve the performance and reliability of electrical and electronic equipments. Evaporates completely, leaving no residue. Safe for all metal surfaces, most rubbers, plastics and coatings.
|
Non-flammable cleaner and degreaser : Non-flammable and non-conductive fast drying cleaner cum degreaser for application over charged electrical and electronic equipments. The coating leaves no residue or sticky film. Effectively prevents short circuits, current leakage, corrosion and fire hazards.
|
Non-flammable electronic component cleaner : Quick drying electronic component cleaner for safe cleaning of all precision electronic equipments. Intense blowing action removes dust from most inaccessible areas and maintain peak operating performance.
|
permanent concrete floor repairs : Quick setting epoxy mortar system for permanent repair of damaged floor and concrete surface. It has compressive strength more than 3 times the typical concrete strength and bonds well to old or new concrete. It can be used over metal substrates in few applications as abrasion resistant coating.
|
Wall crack repair : Single component non cracking putty like material that easily withstands expansion and contraction of substrate. It provides impermeable barrier to the seepage of water and can be used very effectively for sealing applications
|
Acrylic coating for permanent water proofing : Water thin viscosity arcylic based coating when used with cement, provides seamless water proof coating and effectively seals concrete micropores and masonry surface. Non-toxic and excellent resistance to corrosion due to sulphates, chlorides, mineral oils etc., Good UV resistance and does not peel or crack in agening.
|
Under water repair work : Makes effective repair in chronically wet surfaces, even under water.
|
Self leveling glossy floor coating : Extremely eassy to clean, seamless hard wearing epoxy floor coat that produce attractive aesthetic appearence. Ideally suited for areas where high degree of cleanliness are required. Exceptional resistance to abrasion and to a wide range of chemicals.
|
Slip resistance epoxy floor coating : Non-skid and non-slip epoxy coating with excellent abrasion resistance and mechanical strength to prevent accidents at work place. Good footing grip even when contaminated with oil and water.
|
Durable protective coating against static charges : The coating with excellent anti static and conductive properties formulated to reduce build up of electrostatic charge on its surface. All electrostatic charges are harmlessly conducted away though the coating thus protecting the devices. Excellent resistance to abrasion and good aesthetic appearane. It can be very easily cleaned and maintained as it does not attract dust.
|
Reflective marking application : Air drying abrasion resistant tough coating for road and general purpose marking applications. Being retro - reflective, coating upon falls on headlight beam, the light is reflected back to the driver, alert at reasonable distance and to control the speed of vehicle comfortably.
|
Backing of crusher wear plates & for epoxy grouting : 100% solids epoxy compound having high compressive strength and impact resistance for backing wear plates in primary crushers, large gyratory crushers and cone crushers for extreme heavy duty crushing. It is safer and more economical than conventional zinc backing. Also used for grouting of new machinery or replacing old grouts for making solid and perfect foundations, which resist high loads and vibration.
|
Room temperature vulcanlzing silicone sealant : Single component room temperature vulcanizing silicone sealant that cures to rubber like material in the presence of atmospheric moisture. The product has excellent resistance to vibration, moisture and atmospheric conditions.
|
corrosion resistant epoxy coating : 100% solids, solvent free anti-corrosion epoxy coating for protecting steel structural subject to severe corrosive environment. The coating provides a durable smooth finish having excellent weather proof resistance and also resistant to saline, moisture, water, acids & alkails.
|
polyurethane coating for corrosion resistance : Polyurethane based corrosion resistant coating having good resistance to saline environment. The cured product is very elastic and withstands expansion / contraction of the substrate without cracking. Excellent bonding to steel, aluminium, copper, brass, concrete, FRP and wood and easily withstands ultravoilet rays when exposed to sunlight.
|
chemical resistance epoxy coating : Epoxy based coating system having highest chemical resistance for protecting the surfaces under severe acidic and alkaline conditions for both interior and exterior applications.
|
Protective coating for immersion applications : Epoxy tar based coating in combination with mineral fillers for protection of concrete and metal surfaces under totally submerged conditions and for above ground structurals.
|
Anti-fungal / anti-algae coating : Low viscosity polyurethane coating that penetrates deep into concrete and forms watertight seal. Upon curing it develop as impermeable barrier to the passage of water and prevent fungus or algae growth.
|
Fire retardant coating against fire hazards : Single component coating that prevents spreading of fire through puffing. The coating upon exposure to flame forms a thick insulating spongy layer and prevent penetration of heat to the surface underneath and seals out oxygen which fire requires to burn. Besides wood it can be coated over metals which buckless and bends in high temperatures. It can be top coated with decorative paints if required.
|
High temperature protective coating : Available in 3 ranges for service conditions till 2100C, 4100C & 6100C. Single component heat resistant coating that does not crack or peel off and having good resistance to saline environment.
|
thermal barrier insulation coating : Single component coating that blocks the heat are cold transfer through the coated surface to achieve remarkable energy efficiency by saving electricity and energy consumption. Temperature range -35°C to 650°C. The coating is compatiable with all types of paints and can be top coated if required.
|
Heat transfer coating : Single component heat resistant till 400°C, specially formulated for applications where maximum heat transfer is required. The ingredients of compound decipate heat at faster rate reducing the internal temperature of components. Saves tremendous amount of energy and cost that required for cooling and increase plant effciency.
|
Reclaim worn-out equipments : Multi-purpose, specially formulated titanium filled putty having outstanding compressive strength and chemical resistance,recommended for most critical repair and reclamation work.
|
Cost saving repairs : Economical,non-shrinking steel filled putty for repair and reclamation of jobs where longer working time is required.
|
Repair bronze parts and equipments : Bronze filled putty for repairing and rebuilding worn-out bronze,brass & gun metal parts and equipments.
|
Repair aluminium parts and equipments : Aluminium filled putty for repairing and rebuilding worn-out aluminium parts and equipments.
|
Repair copper parts and equipments : Copper filled putty for repairing and rebuilding worn-out copper parts and equipments.
|
Stop live leakage without shutdown : Express curing titanium putty for quick, on-line leak arrest repair of oil, gas, etc., without taking shutdown or draining.
|
High temperature protective coating : Available in 3 ranges for service conditions till 2100C, 4100C & 6100C. Single component heat resistant coating that does not crack or peel off and having good resistance to saline environment.
|
thermal barrier insulation coating : Single component coating that blocks the heat are cold transfer through the coated surface to achieve remarkable energy efficiency by saving electricity and energy consumption. Temperature range -35°C to 650°C. The coating is compatiable with all types of paints and can be top coated if required.
|
fire retardant coating against fire hazards : Single component coating that prevents spreading of fire through puffing. The coating upon exposure to flame forms a thick insulating spongy layer and prevent penetration of heat to the surface underneath and seals out oxygen which fire requires to burn. Besides wood it can be coated over metals which buckless and bends in high temperatures. It can be top coated with decorative paints if required.
|
Under water repair work : Makes effective repair in chronically wet surfaces, even under water.
|
Ceramic in paste form for wear resistance : Diamond hard, ceramic filled putty for repair and reclamation of components subjected to wear caused due to erosion, cavitation and abrasion .
|
Ceramic in brushable form for protective coating : Ceramic in brushable grade for protection of process equipments against bimetallic corrosion, cavitation and pitting.
|
Ceramic in bead form for abrasion resistance : Non sagging tough ceramic system containing ceramic beads and silcone carbide for protecting process equipment against high abrasion.
|
Repair rubber parts & equipments : Polyurethane based product that cures to resilient, rubber like putty for repair of damaged rubber parts and equipment. The putty has outstanding resistance against wear caused due to impact and coarse particle abrasion.
|
Polyurethane protective coating : Polyurethane based brushable product for protection of process equipments against fine particle abrasion and impact under most aggressive conditions.
|
Backing of crusher wear plates & for epoxy grouting : 100% solids epoxy compound having high compressive strength and impact resistance for backing wear plates in primary crushers, large gyratory crushers and cone crushers for extreme heavy duty crushing. It is safer and more economical than conventional zinc backing. Also used for grouting of new machinery or replacing old grouts for making solid and perfect foundations, which resist high loads and vibration.
|
High temperature repair work till 800°C : Single component putty that seals and repairs damaged metal in operating environments up to 800°C. Non toxic and solvent free.
|
Room temperature vulcanlzing silicone sealant : Single component room temperature vulcanizing silicone sealant that cures to rubber like material in the presence of atmospheric moisture. The product has excellent resistance to vibration, moisture and atmospheric conditions.
|
Increase bond strength of epoxies : EPI Sealer is a 100% solids impermeable epoxy system designed as primer coat prior to application of epoxies on smooth surface to increase bonding strength and for protection of
|
